WINTERHALTER SOFTWARE DOWNLOAD
Winterhalter constantly strives to improve its products and periodically provides updates for the software. To keep your machine running smoothly and delivering the best attended results, update the software on a regular basis.
Important Note
From 6 January 2025, the following software packages can only be installed if the date on the machine is set to a date before 6 January 2025.
• UC V02: UC000093
• PT V02: PT000055
• CTR: CTR000040
The reason for this is that the signature of the software packages will no longer be valid from 6 January 2025. However, as the signature is only checked during installation, the current date can be set again after installation.
In order to install higher software packages, the software package listed above must always be installed first if a lower software version is installed on the machine. The software packages listed above are therefore permanently available.
Current Update
RootFS version: 4.3
Frequency inverter version STM32: 20
Frequency inverter version ATSAM: 22
HMI (app) version: 3.0.5
Control unit version: 1.3.3
Automatic hood software version: 1.2.0
Power unit version: 4.0.0
The update contains the following changes:
- The wash pump can now be started in the actuator programme even when the tank is empty.
- Correction factor for detergent dosing during machine filling introduced (P702).
- Correction factor for detergent redosing during machine filling introduced (P703).
- Optimized detergent dosing at the start of the wash cycle and during filling or tank water change.
- Optimized error detection for Error 214 (detergent sensor I7).
- Fixed simultaneous filling and pumping when the hood is opened during filling and the self-cleaning program is then started.
- The event "End of energy recovery" is now correctly transmitted to CONNECTED WASH.
Please note:
- The software update can only be installed if at least software version PT000055 is installed on the machine.
- If this is not the case, set the date on the machine to 05/01/2025 and then install software update PT000055.
- Then set the current date and install the latest software update.
RootFS version: 4.3
HMI (app) version: 3.1.3
Frequency inverter version: V73
Control unit version: 1.4.3
Control unit mini version: 1.5.0
Conductivity measurement unit version: 1.0.0
Quick-start button version: 1.1.4
The update contains the following changes:
- The autonomous modification of parameter values and the resulting undefined machine behavior are fixed.
- When switching from Hygiene mode to Speed mode and back, the machine remained in Speed mode. The issue has been fixed.
- The process of adding detergent when filling the last main wash zone after previous draining via the actuator programme has been optimized.
RootFS version: 4.3
Frequency inverter (rack transport) version: 48
Frequency inverter (rinse booster pump) version: 48
HMI (app) version: 3.0.4
Control unit version: 1.0.10
Power unit version: 2.0.0
The update contains the following changes:
- Slow reaction of the display has been fixed.
- Temperatures in the info menu are displayed in the correct order for machines with ‘right-left’ working direction.
- Error 204 and Error 210 are only displayed if the error is present.
Please note:
- The software update can only be installed if at least software version CTR000040 is installed on the machine.
- If this is not the case, set the date on the machine to 05/01/2025 and then install software update CTR000040.
- Then set the current date and install the latest software update.
RootFS version: 4.3
Frequency inverter version: V48
HMI (app) version: 3.0.3
Control unit version: 1.2.5
The update contains the following changes:
- Slow reaction of the display has been fixed.
- Display of Error 403 is reactivated.
Please note:
- The software update can only be installed if at least software version UC000093 is installed on the machine.
- If this is not the case, set the date on the machine to 05/01/2025 and then install software update UC000093.
- Then set the current date and install the latest software update.
RootFS version: 4.3
Frequency inverter (rack transport) version: 48
Frequency inverter (rinse booster pump) version: 48
HMI (app) version: 3.0.2
Control unit version: 1.0.9
Power unit version: 2.0.0
The update contains the following changes:
- Optimization and bug fixes
RootFS version: 4.3
Frequency inverter version STM32: 20
Frequency inverter version ATSAM: 22
HMI (app) version: 3.0.2
Control unit version: 1.3.2
Automatic hood software version: 1.2.0
Power unit version: 4.0.0
The update contains the following changes:
- Optimization and bug fixes
RootFS version: 4.3
Frequency inverter version: V48
HMI (app) version: 3.0.2
Control unit version: 1.2.4
The update contains the following changes:
- Optimization and bug fixes